Pintail reserve blanks, consist of pieces that were cast specially or the few we find that just stand out as exceptional and unique. Most of these are one off, and never produced again.
You will receive the exact piece(s) shown in the picture!
Barrel blanks are 3″ +/- 1/8″. The outer is 1.610″ and the hole is bored at 5/8″ (.625).
Insert Blanks are 4.5″ +/- 1/8″. The tenon is .625′ in diameter by 2.5″ with a 1/4″ taper at the top. The top cylinder is 1 5/16″ in diameter and roughly 1.5 to 1.75′ long.
Due to the casting process, inner bore may not be perfect center so minor truing of the blank may be necessary. Please read our Acrylic Info page for all information about our blanks.